Home-lift dimensions and wheelchair access
The cabin must fit the person and any equipment, but the room must also allow them to reach it, enter it and leave it. A footprint alone cannot answer all those questions.

Read the labels on the drawing
Internal dimensions describe the usable cabin space. External dimensions describe the outside of the lift. Footprint may include supporting parts beyond the cabin, while aperture dimensions describe the opening needed through the floor. Suppliers do not always use these terms in exactly the same way.
Ask for a labelled installation drawing showing all four where relevant. A product photograph cannot establish any of them. If a website gives only an area in square metres, request width and depth as well. Two shapes with the same area can work very differently in a room.
The Pollock guide shows a published example where cabin, external and footprint measurements differ. Wessex also publishes model dimensions with separate allowances for manual and powered doors.
Measure the wheelchair as it is used
Include footplates, armrests, joystick and any equipment that remains attached. Ask the supplier how it wants the occupied chair measured and weighed. The lift’s maximum load covers the combined load being carried, not simply the weight of the person.
A cabin described as wheelchair capable is not a promise that every wheelchair fits. A longer chair or powered chair may need a different model. Check the entrance opening and the route into the cabin, not just its widest internal measurement.
If an attendant needs to travel too, make that a stated requirement. The lift must be suitable for the number of people travelling in it, with enough space and enough weight capacity. Do not infer it from a photograph showing two people standing inside.
Single entry or through entry?
A single-entry arrangement may mean reversing out at one level. Opposite-side entrances can allow a different route, but they also require suitable room layouts on both floors. Ask which direction the person would face and how they would manoeuvre after leaving.
Try a marked-out layout with the supplier if practical. Include door movement, furniture and the approach from the bedroom or bathroom. A large clear cabin can still be difficult to reach through a narrow doorway elsewhere in the house.
Stiltz names ThruCar versions within its ranges. Do not assume every Duo+ or Trio+ quotation includes that arrangement. Get the exact model and door version on the order and compare it with the drawing.
Travel height, floors and headroom
The maximum travel distance does not tell you how many floors or stops the lift can serve. Many through-floor arrangements connect two levels. A house with three storeys needs a specific discussion about which floors are served and what type of lift is appropriate.
Ask about headroom at the upper level and any effect of a sloping ceiling. The lift route must align between floors, so the most convenient position downstairs may not be usable upstairs. Structural members, services and the available landing space can alter the layout.
The building-work guide explains why the floor opening should be planned from the selected product’s installation requirements. Do not ask a builder to cut an opening based on an internet footprint.
Test the complete journey
Ask the intended user to try the controls, door and seating arrangement where a demonstration is available. Consider reaching the call button, moving into the cabin, remaining in a safe position during travel and leaving at the other end. If assistance is needed, check where the helper would stand.
For uncertain transfer or equipment needs, the NHS describes how a home assessment can identify adaptations. A supplier's survey looks at the lift and the property. Independent advice can also help if you need to consider the person's wider day-to-day needs.
Compare Wessex VM and VE, Terry Harmony ranges, Stiltz Trio+ and suitable Pollock versions against the same measurements. Ask each supplier to explain a proposed exception or limitation. A larger lift can solve one problem while creating another in the room, so judge the whole route rather than choosing the biggest cabin available.